4 PC BSOD (Blue Screen of Death) Errors and Solutions

February 22, 2022 by No Comments

CMOS checksum error 1 . Preset loaded
The CMOS checksum is incorrect, causing the system to corrupt the device’s default configuration. A checksum error may indicate that the CMOS is corrupted. This error may be caused by a low battery. Check the battery and replace if necessary.

The most well-known symptom of a failed CMOS battery is a literally incorrect or slow system date and time in the BIOS, loss of BIOS settings when the computer is turned off without question, a stopwatch error message, etc. If your CMOS battery is dead, the BIOS settings will be erased if the computer is running. without battery.

  • how to deal with this good enough cause of the problem
  • how to protect your data

CMOS Error Message

How do I fix the CMOS error on my computer?

Restart your computer. A normal reboot generates a new checksum and fixes the error.
Download and flash the actual BIOS update. Download the update from the motherboard manufacturer’s website.
Reset the specific BIOS.
Replace CMOS battery.
Contact a technician or computer service person.

CMOS checksum error usually occurs when your computer can’t read boot information, or when the data provided by the CMOS doesn’t really match the data provided by the BIOS. Basically, the CMOS checksum error seems to be due to a new data conflict between CMOS and BIOS.

How To Fix This Error

There are several ways to fix this error, and they are all safe. However, to be on the safe side, it is recommended that you perform a full backup before using any single method.

2.Check The CMOS Battery

Is CMOS checksum error bad?

If you encounter a CMOS checksum error when booting the system, it may mean that the system was accidentally reset to factory settings. CMOS contains BIOS related data and may have been reset causing this error. The problem can also appear due to battery depletion Your CMOS.

The CMOS sensor is battery powered; The problem is not the same as the battery powering your computer. The CMOS battery is very small at the top of this circle and is hidden under a cover all over the motherboard. Find this bank and replace it, and your mistake is It will never happen again.

4. Reset Computer

One of your methods should fix the CMOS checksum error, but if none of them complete, consider restoring your PC to an earlier state. This process is considered irreversible and you will not save any new files or data to the PC. Therefore, you should have a backup to back up all your current files and data before you bring your operating system or workstation home.

What Causes A Checksum Error?

There can be various reasons why this error actually appears on a PC, but the most common reasons for CMOS checksum errors are:

  • Forced Shutdown
  • Outdated or corrupted BIOS
  • Motherboard damaged by power surge
  • Faulty/discharged battery

1. Restarting The PC

If clients receive an error message, first shut down the computer in normal mode, and then restart it. A simple trick will work most of the time.Protected, and the person will no longer see the wrong choice of the CMOS checksum.

3. Reconfigure The BIOS

In general, if you try the two methods above and they don’t work, consider resetting the BIOS on your computer. In turn, if the BIOS is corrupted, this error may appear on your screen. The steps to reset or update the BIOS vary by computer model.

How Can I Protect My Data Before Restarting My Computer?

You only need one software tool to help you back up your data. Interestingly, our own partition diskinternals Recovery is one such application that allows you to create backups for free if you wish. This software application is primarily a Cmos Blend marketing information recovery solution for the operating system, but includes several useful features, including disk imaging.

A hard drive is usually an image, a type of data file backup that simply clones your local disk storage. He with Stores all actually selected drives as well as general drive configurations. Thus, if you back up a disk image, your computer will most likely return to the exact state that the backup was thought to have been made.

How do I fix CMOS checksum error Windows 10?

Restart your computer.
Replace battery.
Repair the CMOS battery terminals.
Reset your own BIOS.
Update BIOS.
Replace any motherboard.

To create a disk image with DiskInternals Partition Recovery, do the following:

  • Download and install DiskInternals Partition Recovery on your Windows computer.
  • Run the program immediately after closing the installation and the “wizard” will start automatically.
  • Select the drive you want to back up (your primary drive), right-click it and select “Create Image”.
  • Also select options and optionally select a directory to save any disk image to. (Note: you should try to save disk images to a third-party disk).

With the free version of DiskInternals Partition Recovery, you can also make multiple hard copies. On the contrary, if you want to recover your lost computer data with the software, it can recover them all, but you should definitelyupgrade to PRO version before you can recover software files is highly recommended

This is a truly revolutionary solution: the results and performance are backed by 15 years of successful hard drive recovery. It is also the preferred choice of most IT professionals.

However, a Blue Screen of Death (BSOD) error can shorten the life of your PC if proper measures are not taken.

The gift turns blue and you get an error code message.

In many cases, a BSOD can be caused by both software and hardware alone. If the cause is almost certainly the first, all you have to do is make a few adjustments. Otherwise, the specific system may need to be reformatted.

The standard way to fix a Windows 10 BSOD error is described here. But what if the cause of these BSOD errors is RAM, HDD, HDD, PSU, Motherboard, Southbridge.

In this article, we’ll take a look at these errors that may hang on yourcomputer and how you can take immediate action.

Code INVALID_DATA_ACCESS_TRAP (error 0x00000004)

How do I fix the CMOS error on my computer?

Restart your computer. A normal machine usually generates a new checksum and clears the error as well.
Download and flash the BIOS update. Download the modification from the website of the motherboard manufactureryou.
Reset the specific BIOS.
Replace solar CMOS cell.
Contact a computer recovery specialist or an expert.

This is still one of the many BSOD errors we’re getting. This can happen in the latest version of Windows 10 – XP.

This can happen when using new hardware or new drivers. INVALID_DATA_ACCESS_TRAP appears during program installation. It could be a conflict between several things. For example,

because your application is being installed; The fabulous driver is loaded, Windows immediately starts or shuts down. There are many reasons for your INVALID_DATA_ACCESS_TRAP error.

Some of them are faulty device drivers, Windows registry corruption, driver conflicts, 0x4 error caused by hard drive failure, RAM corruption, etc.

The following troubleshooting steps can be taken to resolve this INVALID_DATA_ACCESS_TRAP error code.

  • You can use software such as ccleaner to remove registry entries from your PC to remove the 0x00000004 error. This will fix this error.
  • Use the leading anti-virus Programs such as BitDefender, McAfee, and therefore antivirus programs such as Malwarebytes to remove infections on your computer.
  • Update all these PC drivers, including system media like .Net package, etc.
  • Uninstall and reinstall new application software and update our own drivers as needed.
  • Check for a hardware error for file corruption with chkdsk /f, otherwise use any other interface tool.
  • Remove the current RAM from the slot, wipe the gold-plated edges with a clean, dry cloth, and reinsert, see how.
  • Code NTFS_FILE_SYSTEM (error 0x00000024)

    This BSOD error can cause the system to crash suddenly after the error is resolved. It becomes even difficult to write the error code. The main reason for this is that it is an issue with the Pest Control Value error code.

    How do I fix a CMOS error in Windows 10?

    This will rebuild the checksum values ​​and fix the CMOS error. Press F1 or F2 on the error website to go to the BIOS setup web page and select Load Defaults, Load Defaults, or another option to reset BIOS settings to default. On some computers, you may need to enter another key (usually Del or possibly F8) to access the Windows BIOS setup page.

    This could indicate possible hard drive file system corruption and is therefore most likely caused by bad sectors that are neededDims for your hard drive. This is very similar to the NTFS file system. In order not to kill your computer, each of our automatic mechanisms will turn off your computer.

    The main problem is with the NTFS.SYS file. This is a driver file that makes the PC read and assemble the NTFS file system. Even if you have FAT32 or FAT16 systems, you may get a read error.

  • You can use Windows and other Security Essentials to rescan and clean your computer of viruses and malware.
  • Check your hard drive carefully for corruption using the previously mentioned CHKDSK /F command and answer the exact prompts.
  • Check for outdated drivers using any driver update tool. These tools will check all the drivers on your PC and update them automatically so you can use the latest versions.
  • Run the DVD defrag tool available on Windows. You can also try to restore individual slots to your hard drive using the main software.
  • NMI_HARDWARE_FAILURE (error Code 0x00000080)

    How do I fix CMOS checksum error Windows 10?

    Restart this computer.
    Replace battery.
    Repair the CMOS battery terminals.
    Reset BIOS settings.
    Update BIOS.
    Replace the exact motherboard.

    Is CMOS checksum error bad?

    If the system repeats the actual error message, take the corrective action provided for the error message. The CMOS checksum is considered incorrect, possibly due to the system being reset during BIOS boot or due to a dead RTC battery. If the problem persists, replace someone else’s real time clock battery. Reset the real time clock.